讯海轴承/SKF/圆柱滚子轴承/N 307 ECP

SKF N 307 ECP 圆柱滚子轴承 35×80×21 mm斯凯孚 · 瑞典

圆柱滚子轴承 · 主要尺寸 35×80×21 mm

SKF N 307 ECP 圆柱滚子轴承

关键尺寸

35内径 d / mm
80外径 D / mm
21宽度 B / mm

资料下载

SKF N 307 ECP 技术参数

尺寸
SKF N 307 ECP 尺寸示意图
孔径35 mm
外径80 mm
宽度21 mm
孔径35 mm
外径80 mm
宽度21 mm
内圈挡边直径51 mm
外圈滚道直径70.2 mm
倒角尺寸1.5 mm
倒角尺寸1.1 mm
允许轴向位移1.2 mm
性能
基本额定动荷75 kN
基本额定静负荷63 kN
参考转速9500 r/min
极限转速11000 r/min
SKF 性能等级SKF Explorer
属性
轴承部件整套轴承
轴向位移能力两个方向上
列数1
定位特征,轴承外圈不带
孔类型圆柱孔
保持架非金属
法兰数量,外圈0
挡边数量,内圈2
活套法兰无
径向游隙CN
公差等级正常
涂层不带
密封不带
润滑剂无
补充润滑功能不带
新产品的指示性碳足迹1.7 kg CO<sub>2</sub>e
挡肩尺寸
SKF N 307 ECP 挡肩尺寸示意图
隔套直径43 mm
轴承座挡肩直径72 mm
圆角半径1.5 mm
圆角半径1 mm
数据计算
SKF 性能等级SKF Explorer
基本额定动荷75 kN
基本额定静负荷63 kN
疲劳载荷限值8.15 kN
参考转速9500 r/min
极限转速11000 r/min
最小载荷系数0.12
极限值0.2
计算系数0.6

产品说明

Single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the inner ring and no flanges on the outer ring, N design bearings can accommodate axial displacement in both directions. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.

尺寸图纸

SKF N 307 ECP 尺寸图纸

点击图纸可放大查看,再次点击关闭。

同尺寸其他型号

以下型号与 SKF N 307 ECP 的主要尺寸相同(d 35 × D 80 × B 21 mm),可用于同尺寸替代选型。

同系列相近型号